Supplier Code of Conduct
CODE OF CONDUCT
At Visontech Solutions Group (VSG), we are committed to conduct our affairs ethically and in accordance with all applicable laws, rules and regulations.
Our commitment is reflected in our decision to adhere to the principles contained in The Responsible Business Alliance (RBA) Code of Conduct, formerly Electronic Industry Citizenship Coalition® (EICC®) Code of Conduct.
The Visontech Solutions Group Supplier Code of Conduct set forth below is a verbatim reflection of the RBA Code of Conduct.
Visontech Solutions Group expects its suppliers to actively pursue conformance to the Code and its standards.
Participants are committed to uphold the human rights of workers, and to treat them with dignity and respect as understood by the international community.
This applies to all workers including temporary, migrant, student, contract, direct employees, and any other type of worker. The recognized standards, as set out in the annex, were used as references in preparing the Code and may be a useful source of additional information.
The labor standards are:
Freely Chosen Employment
Forced, bonded (including debt bondage) or indentured labor, involuntary or exploitative prison labor, slavery or trafficking of persons shall not be used. This includes transporting, harboring, recruiting, transferring or receiving persons by means of threat, force, coercion, abduction or fraud for labor or services. There shall be no unreasonable restrictions on workers' freedom of movement in the facility in addition to unreasonable restrictions on entering or exiting company-provided facilities. As part of the hiring process, workers must be provided with a written employment agreement in their native language that contains a description of terms and conditions of employment prior to the worker departing from his or her country of origin and there shall be no substitution or change(s) allowed in the employment agreement upon arrival in the receiving country unless these changes are made to meet local law and provide equal or better terms. All work must be voluntary and workers shall be free to leave work at any time or terminate their employment. Employers and agents may not hold or otherwise destroy, conceal, confiscate or deny access by employees to their identity or immigration documents, such as government-issued identification, passports or work permits, unless such holdings are required by law. Workers shall not be required to pay employers' or agents' recruitment fees or other related fees for their employment. If any such fees are found to have been paid by workers, such fees shall be repaid to the worker.
Child labor is not to be used in any stage of manufacturing. The term "child" refers to any person under the age of 15, or under the age for completing compulsory education, or under the minimum age for employment in the country, whichever is greatest. The use of legitimate workplace learning programs, which comply with all laws and regulations, is supported. Workers under the age of 18 (Young Workers) shall not perform work that is likely to jeopardize their health or safety, including night shifts and overtime. Participant shall ensure proper management of student workers through proper maintenance of student records, rigorous due diligence of educational partners, and protection of students' rights in accordance with applicable law and regulations. Participant shall provide appropriate support and training to all student workers. In the absence of local law, the wage rate for student workers, interns and apprentices shall be at least the same wage rate as other entry-level workers performing equal or similar tasks.
Studies of business practices clearly link worker strain to reduced productivity, increased turnover and increased injury and illness. Working hours are not to exceed the maximum set by local law. Further, a workweek should not be more than 60 hours per week, including overtime, except in emergency or unusual situations. Workers shall be allowed at least one day off every seven days.
Wages and Benefits
Compensation paid to workers shall comply with all applicable wage laws, including those relating to minimum wages, overtime hours and legally mandated benefits. In compliance with local laws, workers shall be compensated for overtime at pay rates greater than regular hourly rates. Deductions from wages as a disciplinary measure shall not be permitted. For each pay period, workers shall be provided with a timely and understandable wage statement that includes sufficient information to verify accurate compensation for work performed. All use of temporary, dispatch and outsourced labor will be within the limits of the local law.
There is to be no harsh and inhumane treatment including any sexual harassment, sexual abuse, corporal punishment, mental or physical coercion or verbal abuse of workers; nor is there to be the threat of any such treatment. Disciplinary policies and procedures in support of these requirements shall be clearly defined and communicated to workers.
Participants should be committed to a workforce free of harassment and unlawful discrimination. Companies shall not engage in discrimination based on race, color, age, gender, sexual orientation, gender identity and expression, ethnicity or national origin, disability, pregnancy, religion, political affiliation, union membership, covered veteran status, protected genetic information or marital status in hiring and employment practices such as wages, promotions, rewards, and access to training. Workers shall be provided with reasonable accommodation for religious practices. In addition, workers or potential workers should not be subjected to medical tests or physical exams that could be used in a discriminatory way.
Freedom of Association
In conformance with local law, participants shall respect the right of all workers to form and join trade unions of their own choosing, to bargain collectively and to engage in peaceful assembly as well as respect the right of workers to refrain from such activities. Workers and/or their representatives shall be able to openly communicate and share ideas and concerns with management regarding working conditions and management practices without fear of discrimination, reprisal, intimidation or harassment.
HEALTH & SAFETY
Participants recognize that in addition to minimizing the incidence of work-related injury and illness, a safe and healthy work environment enhances the quality of products and services, consistency of production and worker retention and morale.
Participants also recognize that ongoing worker input and education is essential to identifying and solving health and safety issues in the workplace.
Recognized management systems such as OHSAS 18001 and ILO Guidelines on Occupational Safety and Health were used as references in preparing the Code and may be a useful source of additional information.
The health and safety standards are:
Worker potential for exposure to safety hazards (e.g., chemical, electrical and other energy sources, fire, vehicles, and fall hazards) are to be identified and assessed, and controlled through proper design, engineering and administrative controls, preventative maintenance and safe work procedures (including lockout/tagout), and ongoing safety training. Where hazards cannot be adequately controlled by these means, workers are to be provided with appropriate, well-maintained, personal protective equipment and educational materials about risks to them associated with these hazards. Reasonable steps must also be taken to remove pregnant women/nursing mothers from working condition with high hazards, remove or reduce any workplace health and safety risks to pregnant women and nursing mothers including those associated with their work assignments, as well as include reasonable accommodations for nursing mothers.
Potential emergency situations and events are to be identified and assessed, and their impact minimized by implementing emergency plans and response procedures including: emergency reporting, employee notification and evacuation procedures, worker training and drills, appropriate fire detection and suppression equipment, clear and unobstructed egress adequate exit facilities and recovery plans. Such plans and procedures shall focus on minimizing harm to life, the environment and property.
Occupational Injury and Illness
Procedures and systems are to be in place to prevent, manage, track and report occupational injury and illness including provisions to: encourage worker reporting; classify and record injury and illness cases; provide necessary medical treatment; investigate cases and implement corrective actions to eliminate their causes; and facilitate return of workers to work.
Worker exposure to chemical, biological and physical agents is to be identified, evaluated, and controlled according to the hierarchy of controls. Potential hazards are to be eliminated or controlled through proper design, engineering and administrative controls. When hazards cannot be adequately controlled by such means, workers are to be provided with and use appropriate, well-maintained, personal protective equipment. Protective programs shall include educational materials about the risks associated with these hazards.
Physically Demanding Work
Worker exposure to the hazards of physically demanding tasks, including manual material handling and heavy or repetitive lifting, prolonged standing and highly repetitive or forceful assembly tasks is to be identified, evaluated and controlled.
Production and other machinery shall be evaluated for safety hazards. Physical guards, interlocks and barriers are to be provided and properly maintained where machinery presents an injury hazard to workers.
Sanitation, Food, and Housing
Workers are to be provided with ready access to clean toilet facilities, potable water and sanitary food preparation, storage, and eating facilities. Worker dormitories provided by the Participant or a labor agent are to be maintained to be clean and safe, and provided with appropriate emergency egress, hot water for bathing and showering, adequate lighting, heat and ventilation, individually secured accommodations for storing personal and valuable items, and reasonable personal space along with reasonable entry and exit privileges.
Health and Safety Communication
Participant shall provide workers with appropriate workplace health and safety information and training in the language of the worker or in a language the worker can understand for all identified workplace hazards that workers are exposed to, including but not limited to mechanical, electrical, chemical, fire, and physical hazards. Health and safety related information shall be clearly posted in the facility or placed in a location identifiable and accessible by workers. Training is provided to all workers prior to the beginning of work and regularly thereafter. Workers shall be encouraged to raise safety concerns.
Participants recognize that environmental responsibility is integral to producing world class products.
In manufacturing operations, adverse effects on the community, environment and natural resources are to be minimized while safeguarding the health and safety of the public. Recognized management systems such as ISO 14001 and the Eco Management and Audit System (EMAS) were used as references in preparing the Code and may be a useful source of additional information.
The environmental standards are:
Environmental Permits and Reporting
All required environmental permits (e.g. discharge monitoring), approvals and registrations are to be obtained, maintained and kept current and their operational and reporting requirements are to be followed.
Pollution Prevention and Resource Reduction
Emissions and discharges of pollutants and generation of waste are to be minimized or eliminated at the source or by practices such as adding pollution control equipment; modifying production, maintenance and facility processes; or by other means. The use of natural resources, including water, fossil fuels, minerals and virgin forest products, is to be conserved or by practices such as modifying production, maintenance and facility processes, materials substitution, re-use, conservation, recycling or other means.
Chemicals and other materials posing a hazard to humans or the environment are to be identified, labelled and managed to ensure their safe handling, movement, storage, use, recycling or reuse and disposal.
Participant shall implement a systematic approach to identify, manage, reduce, and responsibly dispose of or recycle solid waste (non-hazardous).
Air emissions of volatile organic chemicals, aerosols, corrosives, particulates, ozone depleting chemicals and combustion by-products generated from operations are to be characterized, routinely monitored, controlled and treated as required prior to discharge. Participant shall conduct routine monitoring of the performance of its air emission control systems.
Participants are to adhere to all applicable laws, regulations and customer requirements regarding prohibition or restriction of specific substances in products and manufacturing, including labeling for recycling and disposal.
Participant shall implement a water management program that documents, characterizes, and monitors water sources, use and discharge; seeks opportunities to conserve water; and controls channels of contamination. All wastewater is to be characterized, monitored, controlled, and treated as required prior to discharge or disposal. Participant shall conduct routine monitoring of the performance of its wastewater treatment and containment systems to ensure optimal performance and regulatory compliance.
Energy Consumption and Greenhouse Gas Emissions
Energy consumption and all relevant Scopes 1 and 2 greenhouse gas emissions are to be tracked and documented, at the facility and/or corporate level. Participants are to look for cost effective methods to improve energy efficiency and to minimize their energy consumption and greenhouse gas emissions.